DSE4520

Auto Mains (Utility) Failure Control Modules

The DSE4520 is a compact Auto Mains (Utility) Failure Control Module that has been developed to provide an outstanding range of features within a compact enclosure.

dse4520
DSE4520, Auto Mains (Utility) Failure Control Module

KEY Features and Benefits

  • Large back-lit icon LCD display.
  • Displays information to the operator in a clear and concise format.
  • Heated display option.
  • Ensures the display continues to operate in extreme cold weather conditions.
  • 3-phase generator sensing.
  • Provides true generator sensing.
  • 3-phase generator and mains (utility) sensing.
  • Provides true generator and mains (utility) sensing.
  • 600 V ph-ph nominal system compatibility.
  • Provides global flexibility.
  • Generator & load power monitoring (kW, kV A, kV Ar, pf).
  • Provides clear accurate power measurement information.
  • Generator overload protection (kW).
  • Provides engine overload protection.
  • Configurable inputs & outputs.
  • Provides multiple installation options.
  • Fuel and start outputs (configurable on CAN).
  • Provides multiple installation options.
  • Configurable DC, volt-free and staged loading outputs.
  • Provides multiple installation options.
  • CAN & alternator speed sensing.
  • Provides full monitoring flexibility.
  • Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
  • Ensures the engine is fully monitored for improved operating performance.
  • Battery voltage monitoring.
  • Ensures the battery maintains enough power at all times.
  • Configurable event log (50).
  • Provides access to historical alarms and operational status.
  • DSE Configuration Suite PC Software.
  • Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

SPECIFICATION

OVERALL SIZE

140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.5”)

PANEL CUTOUT SIZE
118 mm x 92 mm (4.6″ x 3.6″)

MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT
51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V

MAXIMUM DEEP SLEEP CURRENT
<10 uA at 12 V, <10 uA at 24 V

MAINS (UTILITY) 

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at supply voltage

OUTPUT B (START)
10 A short term, 5 A continuous,
at supply voltage

AUXILIARY OUTPUTS C, D, E & F
2 A DC at supply voltage ­­

GENERATOR

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

Connection Diagram

DSE4520 connection diagram

Request a Quote (Please fill form below) :

 

 

 

 

 

Author: mavinelectric

Electrical Engineering Contractor